Hikvision DS-3E1309P-EI Professional 8 Port Fast Ethernet Smart POE Switch managed 1 Uplink

What is included:

• 1x Hikvision DS-3E1309P-EI 8 Port Fast Ethernet Smart POE Switch managed

Hikvision DS-3E1309P-EI Features:

• 8 × 100 Mbps PoE RJ45 ports, 1 × gigabit network RJ45 port.
• IEEE 802.3at/af standard for PoE ports.
• Network topology management, alarm push, network health monitor.
• 6 KV surge protection for PoE ports.
• Up to 300 m long-range transmission.
• AF/AT camera can reach up to 300 m in extend mode.

Hikvision DS-3E1309P-EI Specifications:

General

• Shell Metal material, fan-free design
• Net Weight 0.35 kg (0.77 lb)
• Gross Weigh t1.114 kg (2.45 lb)
• Dimensions (W × H × D)170.00 mm × 27.60 mm × 93.10 mm (6.69” × 1.09” × 3.67”)
• Operating Temperature 0 °C to 40 °C (32 °F to 104 °F)
• Storage Temperature -40 °C to 85 °C (-40 °F to 185 °F)
• Operating Humidity 5% to 95% (no condensation)
• Relative Humidity 5% to 95% (no condensation)
• Power Supply 48 VDC, 2.5 A
• Installation Mode Desk-Mounted, Wall-Mounted
• Max. Power Consumption120 W
• Power Consumption In Idle10 W
• Surge Protection6 KV

Network Parameters

• Ports 8 × 10/100 Mbps PoE port,1 × 1 Gigabit RJ45 port
• MAC Address Table 16 K
• Packet Forwarding Rate 4.17 Mpps
• Internal Cache 4Mbits
• Switching Capacity 5.6 Gbps

PoE Power Supply

• PoE Standard IEEE 802.3af,IEEE 802.3at
• PoE Power Pin 8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
• PoE Port PoE: Ports 1 to 8
• Max. Port Power 30 W
• PoE Power Budget 110 W

Software Function

• Long Range

  Ports 1 to 8: up to 300 m.

  Long range performance may vary depend on camera model or cable condition.

• VIP Port/
• Port Isolation/
• PoE Watchdog/
• Link Aggregation/
• QoS/
• Loop Prevention/
• VLAN/
• HPP

  Support one-click activation and remote management via Hik-Partner Pro. Functions supported:

  1. Display the port rate.

  2. Display the port bandwidth utilization rate.

  3. Display the PoE power usage.

  4. Display topology information.

  5. Display the alarm status.

  6. Restart ports and devices.

  7. Enable port long-rage mode.

  8. Remotely upgrade the device.

• System Maintenance

  Support device management via web.

  Support DHCP Client. Enabled by default for dynamic assignment of management IP addresses.

  Support Super IP, which is a fixed IP address (10.180.190.200) for direct access.

  Support management via Hik-Central Pro.

  Support remote management via Hik-Partner Pro.

  Support cable detection. Abnormal open circuits and short circuits as well as network cable length can be detected.

  Supports 802.1ab LLDP for peer device discovery.

  Support SNMP v1/v2c for third-party management platform access.

  Support port mirroring for fault locating.

• Port Rate-Limiting/
• Storm Control/
• IGMP Snooping/
• DHCP Snooping/
• ACL/
• IPSG/

Approval

• EMC FCC (47 CFR Part 15, Subpart B),CE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020),IC (ICES-003: Issue 7:2020),RCM (AS/NZS CISPR 32: 2015)
• Safety UL (UL 60950-1),CB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
• Chemistry CE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)