Description
Dahua DHI-ITC413-PW4D-IZ1 4MP ANPR 2.7–12mm Motorised PoE+ Camera
Dahua DHI-ITC413-PW4D-IZ1 is a 4MP number plate recognition camera designed for vehicle entrances, exits and controlled parking areas. Its 2.7–12mm motorised varifocal lens lets you adjust the view to your capture point, while built-in plate recognition helps identify vehicles arriving at your site.
This Dahua ANPR camera combines vehicle analysis, infrared illumination and barrier-control connections in one unit. With an integrated bracket and junction box, it provides a practical vehicle access control camera for businesses, residential developments and other premises managing vehicle access.
Why Choose This Product?
Choose this number plate recognition camera when you need more than general CCTV footage at an entrance. It can read supported number plates and record vehicle information, helping you review arrivals and manage access using configured allowlists, blocklists and compatible external equipment.
The Dahua ANPR camera performs recognition within the camera. A separate recorder can provide central video storage, while supported management software can organise events and vehicle records. Functions available through a recorder or platform depend on the model, firmware and integration.
4MP Detail with a Motorised Varifocal Lens
The 1/1.8-inch CMOS sensor produces video at up to 2688 × 1520 resolution, with up to 25fps in PAL mode or 30fps in NTSC mode. The 2.7–12mm motorised lens helps you frame the vehicle approach and capture area without physically changing the lens.
Dahua specifies a 3–8m capture distance and 3–4m detected width for this IZ1 version. Position and configure the camera around the intended capture point, with number plates clearly visible as vehicles pass. The stated maximum detection speed is 80km/h; actual recognition depends on mounting angle, plate visibility, lighting and camera settings.
Number Plates, Vehicle Details and Access Lists
Built-in analysis recognises supported number plates alongside vehicle type, brand/logo and colour. It also supports detection of vehicles without plates. Britain is included in the supported European region, with the appropriate firmware and regional settings required.
As a vehicle access control camera, the unit supports separate allowlists and blocklists with up to 110,000 entries each. Two relay outputs can connect to a compatible barrier controller, with additional alarm, RS-485 and Wiegand connections for integration.
Barrier operation requires compatible external equipment, suitable wiring and configured access rules. A barrier or gate operator is not included with the camera.
Infrared Night Monitoring and 140dB WDR
Four built-in 850nm infrared illuminators support monitoring in darkness. The IZ1 illumination ratings are 10m for ANPR and 30m for general video monitoring. These lighting figures are separate from the specified 3–8m vehicle capture distance.
Infrared night mode produces black-and-white images. Colour imaging requires sufficient visible light. The camera also includes 140dB wide dynamic range, highlight compensation and backlight compensation to help manage scenes containing bright headlights and darker areas.
Audible Warnings and Red/Blue Warning Lights
The camera includes a built-in microphone, a 2W speaker and red/blue warning lights. Supported events can trigger audible and visible warnings, and custom audio can be imported for suitable announcements or deterrent messages.
Intrusion and loitering detection support up to four configured areas. Event actions include snapshots, supported uploads, notifications and alarm-output activation, depending on the selected configuration.
Recording, Software and PoE+ Installation
A compatible TF/microSD card up to 256GB provides an onboard storage option. For central video recording and playback, connect the camera to a suitable network video recorder with a fitted surveillance hard drive. Storage media and the recorder are sold separately.
Supported software includes DSS Pro, DSS Express, Smart PSS and DMSS. Available viewing, event and vehicle-management functions depend on the software, firmware and integration. Confirm any required ANPR search or barrier-management functions when selecting the rest of the system.
Power the camera using IEEE 802.3at PoE+ or a suitable 12V DC, 2A supply. PoE+ carries power and network data through one compatible Ethernet cable. Allow for the specified maximum 20W requirement when planning the power source and total system load.
Technical Specifications
| Specification | Details |
|---|---|
| Brand | Dahua |
| Model | DHI-ITC413-PW4D-IZ1 |
| Camera Type | 4MP access ANPR network camera with infrared illumination |
| Image Sensor | 1/1.8-inch progressive scan CMOS |
| Maximum Resolution | 2688 × 1520 (4MP) |
| Frame Rate | Up to 25fps in PAL mode or 30fps in NTSC mode at 4MP |
| Lens | 2.7–12mm motorised varifocal; F1.4 maximum aperture; DC iris |
| Focus Control | Automatic, area focus and manual |
| Field of View | Horizontal: 92°–46.1°; vertical: 49°–26°; diagonal: 109°–52.8° (wide–telephoto) |
| Capture Distance | 3–8m for the IZ1 version |
| Detected Width | 3–4m |
| Maximum Detection Speed | 80km/h; successful capture depends on installation, lighting and vehicle presentation |
| Infrared Illumination | Four 850nm IR illuminators; automatic or manual control |
| Illumination Distance | ANPR: 10m; general video monitoring: 30m. These are illumination ratings, separate from the 3–8m capture distance |
| Day/Night Operation | IR-cut filter; colour, black-and-white and automatic modes |
| Minimum Illumination | Colour: 0.0004 lux at F1.4; black and white: 0.0001 lux at F1.4, both at 30 IRE; 0 lux with illumination on |
| Wide Dynamic Range | 140dB WDR |
| Image Enhancement | HLC, BLC, 3D noise reduction, scene self-adaptation and digital detail enhancement |
| Electronic Shutter | Automatic/manual: 1/25 to 1/100,000 second |
| Video Compression | H.265, H.264 and MJPEG; main and sub-stream support |
| Vehicle Recognition | Number plate, vehicle type, brand/logo and colour; detection of vehicles without plates |
| Vehicle Classification | 147 vehicle logos, 12 vehicle colours and 10 vehicle types |
| Regional Plate Support | Britain included in the supported European region; appropriate firmware and region configuration required |
| Vehicle Lists | Up to 110,000 allowlist entries and 110,000 blocklist entries |
| Perimeter Events | Intrusion and loitering detection; up to four areas |
| Warning Functions | Red/blue warning lights and audible warnings; custom audio supported |
| Audio | Built-in microphone with stated 3m pickup distance; built-in 2W speaker; one RCA audio output |
| Alarm Connections | Two optocoupler inputs and two relay outputs for compatible external equipment |
| Serial and Access Interfaces | Two half-duplex RS-485 interfaces; one 26-bit Wiegand interface |
| Network Connection | One RJ45 10/100Mbps Ethernet port |
| Integration | ONVIF Profiles S, T and M; CGI; ITSAPI; SDK/API support |
| Management Software | DSS Pro, DSS Express, Cybercity, Smart PSS and DMSS; available functions depend on software and firmware |
| Local Storage | TF/microSD card support up to 256GB, subject to card compatibility; card sold separately |
| Network Recovery | Automatic Network Replenishment supported with compatible platform/FTP configuration |
| Power Supply | 12V DC, 2A, or IEEE 802.3at PoE+ Type 2, Class 4 |
| Power Consumption | Maximum 20W specified; under 6W without lighting, under 12W with lighting, under 17W with speaker and red/blue warnings active |
| Protection Ratings | IP67 weather protection and IK10 impact resistance |
| Housing and Mounting | Aluminium alloy and plastic; integrated bracket and junction box |
| Optional Mounting Accessories | Dahua PFA150 pole mount and IPMECB-1121-12 bracket; sold separately |
| Dimensions | 395 × 120.8 × 127.8mm (L × W × H) |
| Weight | 2.3kg net; 3.2kg gross |
| Operating Conditions | -30°C to +65°C; 10–90% relative humidity, non-condensing |
| Storage Conditions | -40°C to +70°C; up to 95% relative humidity, non-condensing |
Official Datasheet
Read the manufacturer’s specifications for the DHI-ITC413-PW4D series. For this listing, refer to the DHI-ITC413-PW4D-IZ1 values with the 2.7–12mm lens and infrared illumination.
What’s Included
- 1 × Dahua DHI-ITC413-PW4D-IZ1 4MP ANPR camera with a 2.7–12mm motorised lens, integrated bracket and junction box.
This listing is for one camera. Recorder, storage media, network cable, monitor, barrier equipment and optional pole-mounting accessories are sold separately. A suitable PoE+ source or 12V DC power supply is required.
Ideal For
- Business car park entrances and exits.
- Residential developments with controlled vehicle access.
- Factories, warehouses and service-yard entrances.
- Schools, hospitals and office premises managing arriving vehicles.
- Compatible barrier systems using configured vehicle access lists.
Installation & Compatibility
Plan the camera position around the vehicle route and the specified 3–8m capture distance. Adjust the lens, focus, exposure and recognition area during commissioning, then test with representative vehicles in daylight and darkness.
The camera has an integrated bracket and junction box, so a separate camera back base is not needed for a suitable direct wall or ceiling installation. For pole installations, Dahua lists the optional PFA150 pole mount and IPMECB-1121-12 bracket; select the appropriate arrangement for the site.
Use a compatible IEEE 802.3at PoE+ connection or the specified DC supply. Protect all cable entries and connections against moisture and install the unit within its operating limits. IP67 and IK10 ratings do not remove the need for correct mounting and sealing.
Basic video compatibility and advanced ANPR integration are separate considerations. Confirm the required plate-event recording, search, notifications and barrier functions with the chosen recorder or management platform. Barrier connections should be installed and configured by a suitably competent installer.
Complete Your Installation
The Dahua NVR4104HS-P-EI is a four-channel recorder option with PoE+ ports for compatible camera connections. Check the required ANPR integration and the recorder’s shared 45W PoE budget when planning your system. A surveillance hard drive is required for NVR recording.
Add the 20m outdoor solid-copper CAT5 cable for the network connection. The Uniview MW3222-V-DT Full HD monitor connects to the recorder for local viewing; set the recorder display output to a supported resolution. These items are sold separately.
Dahua 4-Channel PoE NVR20m Outdoor CAT5 CableUniview Full HD Monitor
Need Help Choosing Your ANPR Camera?
Contact us for help matching the Dahua DHI-ITC413-PW4D-IZ1 to your vehicle entrance, capture distance, recording requirements and access-control equipment.
Call 0161 312 7477Email UsWhatsApp 07305 398061WhatsApp 07870 565644
